Hikvision DS-K1T343EX User Manual

Loading ...

If enable the funcon, the device can recognize the EM card. You can present EM card on the

device.

Note

If the peripheral card reader supports presenng EM card, the funcon is also supported to

enable/disable the EM card funcon.

Click OK.

Oponal: Click Copy to, and then select the access control device(s) to copy the parameters in

the page to the selected device(s).

Congure Parameters for Door/Elevator

Aer adding the access control device, you can congure its access point (door or oor)

parameters.

Before You Start

Add access control device to the client.

Steps

Click Access Control → Advanced Funcon → Device Parameter .

Select an access control device on the le panel, and then click to show the doors or oors of

the selected device.

Select a door or oor to show its parameters on the right page.

Edit the door or oor parameters.

Note

●

The displayed parameters may vary for dierent access control devices.

●

Some of the following parameters are not listed in the Basic Informaon page, click More to

edit the parameters.

Name

Edit the card reader name as desired.

Door Contact

You can set the door sensor as remaining closed or remaining open. Usually, it is remaining

closed.

Exit Buon Type

You can set the exit buon as remaining closed or remaining open. Usually, it is remaining

open.

Door Locked Time

Aer swiping the normal card and relay acon, the mer for locking the door starts working.

Extended Open Duraon

DS-K1T343 Series Face Recognion Terminal User Manual

143

Loading ...

Hikvision DS-K1T343EX Value Series Face Access Terminal