Hikvision DS-K1T343EX User Manual

Loading ...

Congure Parameters for Access Control Device

Aer adding the access control device, you can congure its parameters, including overlaying user

informaon on picture, uploading pictures aer capturing, saving captured pictures, etc.

Steps

Click Access Control → Advanced Funcon → Device Parameter .

Note

If you can nd Device Parameter in the Advanced Funcon list, Hover the cursor on the

Advanced Funcon, and then Click to select the Device Parameter to be displayed.

Select an access device to show its parameters on the right page.

Turn the switch to ON to enable the corresponding funcons.

Note

●

The displayed parameters may vary for dierent access control devices.

●

Some of the following parameters are not listed in the Basic Informaon page, click More to

edit the parameters.

Voice Prompt

If you enable this funcon, the voice prompt is enabled in the device. You can hear the voice

prompt when operang in the device.

Upload Pic. Aer Linked Capture

Upload the pictures captured by linked camera to the system automacally.

Save Pic. Aer Linked Capture

If you enable this funcon, you can save the picture captured by linked camera to the device.

Face Recognion Mode

Normal Mode

Recognize face via the camera normally.

Deep Mode

The device can recognize a much wider people range than the normal mode. This mode is

applicable to a more complicated environment.

Enable NFC Card

If enable the funcon, the device can recognize the NFC card. You can present NFC card on

the device.

Enable M1 Card

If enable the funcon, the device can recognize the M1 card. You can present M1 card on the

device.

Enable EM Card

DS-K1T343 Series Face Recognion Terminal User Manual

142

Loading ...

Hikvision DS-K1T343EX Value Series Face Access Terminal