Loading ...
Loading ...
Loading ...
Network Camera User Manual
vii
Transportation
● Keep the device in original or similar packaging while transporting it.
System Security
● The installer and user are responsible for password and security configuration.
Maintenance
● If the product does not work properly, please contact your dealer or the nearest service center.
● We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
Cleaning
● Please use a soft and dry cloth when clean inside and outside surfaces of the product cover. Do
not use alkaline detergents.
Using Environment
● When any laser equipment is in use, make sure that the device lens is not exposed to the laser
beam, or it may burn out.
● DO NOT expose the device to high electromagnetic radiation or dusty environments.
● For indoor-only device, place it in a dry and well-ventilated environment.
● DO NOT aim the lens at the sun or any other bright light.
● Make sure the running environment meets the requirement of the device. The operating
temperature shall be -30 °C to 60 °C (-22 °F to 140 °F), and the operating humidity shall be 95%
or less (no condensing).
● DO NOT place the camera in extremely hot, cold, dusty or damp locations, and do not expose it
to high electromagnetic radiation.
Emergency
● If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the
power cable, and contact the service center.
Time Synchronization
● Set up device time manually for the first time access if the local time is not synchronized with
that of the network. Visit the device via Web browse/client software and go to time settings
interface.
Reflection
● Make sure that no reflective surface is too close to the device lens. The IR light from the device
may reflect back into the lens causing reflection.
Loading ...
Loading ...
Loading ...