Loading ...
Loading ...
Loading ...
Network Camera User Manual
93
uploaded.
Before You Start
Go to Configuration → System → System Settings → VCA Resources, ad select Road Traffic.
Steps
1. Go to Configuration → Road Traffic → Detection Configuration, and select Mixed-traffic
Detection as detection type.
2. Check Enable.
3. Select the lane number.
4. Select Region and Country/Region.
5. Set arming schedule and linkage method. For the arming schedule settings, refer to Set Arming
Schedule. For the linkage method settings, refer to Linkage Method Settings.
6. Click Save.
10.3.3 Uploading Pictures Settings
You can set the image parameters of the captured images in vehicle detection and mixed-traffic
detection.
Go to Configuration → Road Traffic → Picture.
Picture Quality
The larger the value is, the clearer the picture is, but larger storage space is also required.
Picture Size
The larger the value is, the larger the storage space is needed. And the level of network
transmission requirement is also higher.
License Plate Enhancement
The larger the value is, the clearer the license plate is, but larger storage space is also required.
Check License Plate Enhancement and set the level. The default level is 50.
Overlay
You can overlay camera, device or vehicle information on the captured image and click to
adjust the order of overlay texts.
For camera settings, go to Configuration → Road Traffic → Camera to set relevant parameters
and click Save.
10.3.4 Camera Settings
You can set the parameters of each camera for better management.
Go to Configuration → Road Traffic → Camera to set relevant parameters and click Save.
10.3.5 Import or Export Blocklist & Allowlist
You can import and export the blocklist and allowlist as desired, and check the list content in this
Loading ...
Loading ...
Loading ...