Loading ...
Loading ...
Loading ...
Network Camera User Manual
107
Note
Face picture is not allowed to change.
5) Click OK.
5. Create models for each face picture in library.
Modeling process builds up face model for each face picture. Face model is required for face
picture comparison to take effect.
Modeling
Select one or more face pictures, and click Modeling.
Batch Modeling
Select a face picture library, and click Batch Modeling.
6. Optional: Repeat to create more face libraries.
7. Click Save.
Set Face Picture Comparison
The function compares captured pictures with face pictures in library and outputs comparison
result. Comparison result can trigger certain actions when arming schedule and linkage method
are set.
Before You Start
You should first create a face picture library and add face pictures. See Set Face Picture Library.
Steps
1. Go to Configuration → Comparison and Modeling.
2. Select Face Picture Comparison.
3. Check Enable Face Picture Comparison.
4. Select a face picture library as the reference.
5. Select desired information to upload.
6. Select a comparison mode.
Best Comparison
The device captures and compares the target face continuously when
the face target stays in the detection area, and upload the best
scored face picture and related alarm information when the target
face leaves the area.
Quick Comparison
The device capture and compares the target face when the face
grading exceeds the set Face Grading Threshold for Capture.
Face Grading Threshold for Capture
The face grading threshold for the device to judge whether to capture and upload the face or not.
Max. Capture Interval
The max. interval between two captures when the target is in the detection area. The camera
takes the capture when it reaches the max. interval even if the face grading does not reach the set
Loading ...
Loading ...
Loading ...