Loading ...
Loading ...
Loading ...
Network Camera User Manual
108
threshold.
Quick Setup Mode
Select the mode according to actual using scenarios. In custom mode, you can set Comparison
Timeout and Comparison Times.
7. Set arming schedule. See Set Arming Schedule.
8. Set linkage method. See Linkage Method Settings.
View Face Picture Comparison Result
Steps
1. Go to Application.
2. Set search condition and click Counting.
Matched results are shown in Face Picture Comparison Statistics area.
10.9.2 Face Modeling
Face modeling serves the purpose of collecting face pictures, creating face models and uploading
data to the surveillance center.
Before You Start
Face Capture or Multi-Target-Type detection should be configured for face picture collection. See
Face Capture or Multi-Target-Type Detection for configuration instructions.
Steps
1. Go to Configuration → Comparison and Modeling.
2. Select Face Modeling to start.
3. Check Enable Face Modeling.
4. Set parameters for modeling.
Report Face Modeling Information in Multi-Target-Type Capture Alarm
When a person triggers the multi-target-type detection, the alarm information includes the
face modeling information of the detected face if checked.
Quick Capture
The device starts face modeling when it detects a face which scores higher than the set face
grading threshold for capture.
Face Grading Threshold for Capture
The face grading threshold for the device to judge whether to capture and upload the face or
not. Higher value means better picture quality.
Max. Capture Interval
The max. interval between two captures when the target is in the detection area. The camera
Loading ...
Loading ...
Loading ...