Loading ...
Loading ...
Loading ...
14. Set up Beep sound
Login system, enter menu page (refer page 3 “4. Rule of operation”).
You may turn on or off sound.
15. Check user information
Login system, enter menu page (refer page 3 “4. Rule of operation”).
You may check user information in “About” under the system.
16. Change administrator code
Login system, enter menu page (refer page 3 “4. Rule of operation”).
Please change default administrator code (1, 2, 3, 4) after you set up lock..
17. Reset system
Login system, enter menu page (refer page 3 “4. Rule of operation”).
You may reset system to manufacture default. All audit logs will be removed after
reset but all fingerprint and user code will remain in system. Administrator code will
revert to default code 1, 2, 3, 4. You may use delete all command to remove all finger
or user code from system.
18. Audit Trail log
Login system, enter menu page (refer page 3 “4. Rule of operation”).
You may check audit trail logs on lock directly. Touch “2” or “8” to page up or
down.
Menu
User Code
System
2↑,8↓, # Enter
System
Verify Mode
Beep
2↑,8↓, # Enter
Beep
On
Off
2↑, 8↓, # Enter
Menu
User Code
System
2↑,8↓, # Enter
System
Beep
About
2↑,8↓, # Enter
Admin Finger
Capacity: 3
Admin: 1
2↑, 8↓, * Exit
Menu
User Code
System
2↑,8↓, # Enter
System
User info
Admin code
2↑,8↓, # Enter
Current Code
_ _ _ _ _ ****
* Exit, # Enter
Enter New Code
_ _ _ _ _ ****
* Exit, # Enter
Enter again
_ _ _ _ _ ****
* Exit, # Enter
Successful
Menu
User Code
System
2↑,8↓, # Enter
System
Admin code
Reset
2↑,8↓, # Enter
Reset ?
Press # to confirm
Loading ...
Loading ...
Loading ...