Loading ...
Loading ...
Loading ...
fig. 4
fig. 5
2. Set up inside Lever: Put Lever on Lever Spindle then use Allen Wrench to put
Allen Screw (see fig. 5). Reverse the step when you want to remove Lever.
3. Set up outside Lever: Set up lever to fit for either left-handed or right-handed door.
3.1 Make sure that the dent is on 12-clock position when lock hasn’t be installed on
the door (see fig. 1), if not, rotate Square Spindle.
3.2 Rotate inner Spindle by Flathead Screwdriver let Cylindrical Protrusions
horizontally aligned (see fig. 6).
3.3 Insert Lever Catch in the right side hole on Lever Spindle completely if your
door is left-handed (see fig. 7a), otherwise put it in the left side hole (see fig. 8a). The
big end on the Lever Catch goes into the hole first.
fig. 2
fig. 3
Loading ...
Loading ...
Loading ...