Loading ...
Loading ...
Loading ...
en-us Operation
24
Notes
¡ Ensure that the silicone patch is completely dry before
attaching the cooking sensor.
¡ Position the cookware in such a way that the cooking
sensor is pointing towards the outer side of the cooktop.
¡ To prevent overheating, do not align the cooking sensor
to any other hot cookware.
¡ When you are not using the cooking sensor, remove it
from the cookware and store it in a clean, secure loca-
tion, away from any heat sources.
¡ You can use up to three cooking sensors at the same
time.
Connecting the wireless cooking sensor to the control
panel
The cooking functions are available as soon as the wire-
less cooking sensor has been connected to the control
panel correctly.
1. Touch in the function bar to enter the basic settings.
2. Select the setting for cooking sensor pairing.
3. Touch .
4. Briefly touch the symbol on the wireless cooking sen-
sor within the next 30seconds.
After a few seconds, the status of the connection be-
tween the cooking sensor and the control panel is indi-
cated.
5. Touch .
6. To connect another cooking sensor, touch . To exit
the basic settings, touch .
7. If the connection has failed, reset the wireless cooking
sensor and repeat the connection procedure.
→
"Resetting the wireless cooking sensor", Page24
8. If there are problems with the connection due to a trans-
mission error, repeat the connection procedure.
9. If no connection can be established, inform Customer
Service.
Note
The connection may not be established correctly for the
following reasons:
¡ Bluetooth® communication error.
¡ You have not pressed the symbol on the cooking
sensor within 30seconds after selecting the cooking
zone.
¡ The battery in the wireless cooking sensor is almost flat.
Resetting the wireless cooking sensor
1. Press and hold for 8 to 10seconds.
a While you keep the touch key pressed, the LED indica-
tor on the wireless cooking sensor lights up three times.
2. When the LED lights up for the third time, release the
touch key.
a The reset procedure starts.
a When the LED goes out, the wireless cooking sensor
has been reset.
3. Repeat the connection process.
Cleaning
Do not clean the wireless cooking sensor in the dish-
washer.
Cooking sensor
Clean with a damp cloth. Do not place in the dishwasher
and do not get it wet.
When you are not using the cooking sensor, remove it
from the cookware and store it in a clean, secure location,
away from any heat sources.
Silicone patch
Clean and dry before attaching the cooking sensor. Suit-
able for dishwashers.
Note:The cookware with the silicone patch must not be
left to soak for long periods in soapy water.
Cooking sensor window
The cooking sensor window must always be clean and
dry. Note:
¡ Remove dirt and oil splatters regularly.
¡ For cleaning, use a cloth or q-tips and window cleaning
solution.
Notes
¡ Do not use hard or rough objects such as bristle
brushes or scouring pads to clean the cooktop, and do
not use scouring agents.
¡ Do not touch the window of the wireless cooking sensor
with your fingers; this will soil or scratch it.
Replacing the battery
If the cooking sensor does not light up when you touch the
symbol, the battery has discharged. Replacing the battery:
1. Remove the silicone cover from the lower section of the
cooking sensor casing and remove both screws using a
screwdriver.
Loading ...
Loading ...
Loading ...