Loading ...
Loading ...
Loading ...
User Manual
44 / 68
The amplitude cursor appears as a horizontal dotted line, measuring the vertical parameters.
The time cursor appears as a vertical dotted line, measuring the horizontal parameters.
The cursor measurement includes two modes: Manual mode and Tracking mode.
1. Manual mode:
Horizontal cursors or vertical cursors appear in pair to measure time or voltage, and the distance between the cursors can be
manually regulated. The signal source should be set as a waveform to be measured before the cursors are used.
2. Tracking mode:
A horizontal cursor is intersected with a vertical cursor to form a cross cursor. The cross cursor is automatically located on the
waveform, and the horizontal position of the cross cursor on the waveform is regulated by selecting “Cur A” or “Cur B” and
rotating the [UNIVERSAL] knob. The coordinates of the cursor point will be displayed on the screen of the oscilloscope.
Push the CURSOR button to display the Cursor Menu.
Options
Settings
Comments
Mode
Manual
Track
Select a measurement cursor and display it.
Source
CH1~CH2
MATH
Select a waveform to take the cursor measurement.
Use the readouts to show the measurement.
Select Cursor
AX(BX)
AXBX
AY(BY)
AYBY
A selected cursor is highlighted, which can be moved freely. Both cursors
can be selected and moved at the same time. The box behind the cursor
displays the location of the cursor.
Moving Cursors: Press the key near Select Cursor to select a cursor and turn Multifunctional Knob to move it. Cursors can
be moved only when the Cursor Menu is displayed.
2.10.3. Automatic Measurement
Automatic Measurement: The oscilloscope performs all the calculations automatically in this mode. As this measurement
uses the waveform record points, it is more precise than the graticule and cursor measurements. Automatic measurements show
the measurement results by readouts which are periodically updated with the new data acquired by the oscilloscope.
Loading ...
Loading ...
Loading ...