Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/92457662-dso2d10/bg24.png)
User Manual
36 / 68
2. The decoded data is at the bottom of the waveform interface by default, and displayed in purple;
3. When there are "?" or "adjust the time base", you need to adjust the time base to see the decoding results.
UART text interface is shown as below:
2.8.2. LIN Decode
LIN decode settings: Source: CH1; Baud: 19200; Idle: High; When: Identifier; Identifier: 0X15; And set the trigger level.
The trigger result is shown below:
LIN Decode interpretation:
1. The decode data is displayed in hexadecimal;
2. The decoded data is at the bottom of the waveform interface by default. The color of "Frame ID" and "Checksum" is purple,
and the color of "Data" is blue;
3. When there are "?" or "adjust the time base", you need to adjust the time base to see the decoding results.
4. In the LIN decode result, the synchronous field "55" is not decoded and displayed.
LIN text interface is shown as below:
Loading ...
Loading ...
Loading ...