Loading ...
Loading ...
Loading ...
Do not dispose of the baery into re or a hot oven, or
mechanically crush or cut the baery, which may result in an
explosion.
Do not leave the baery in an extremely high temperature
surrounding environment, which may result in an explosion or
the leakage of ammable liquid or gas.
Do not subject the
baery to extremely low air pressure, which
may result in an explosion or the leakage of ammable liquid
or gas.
Dispose of used
baeries according to the instrucons.
●
If the product does not work properly, please contact your
dealer or the nearest service center. Never aempt to
disassemble the device yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance.)
Cauons:
●
The equipment shall not be exposed to dripping or splashing
and that no objects lled with liquids, such as vases, shall be
placed on the equipment.
●
Ensure correct wiring of the terminals for connecon to an AC
mains supply.
●
The equipment has been designed, when required,
modied
for connecon to an IT power distribuon system.
●
No naked ame sources, such as lighted candles, should be
placed on the equipment.
●
The serial port of the equipment is used for debugging only.
●
Stainless steel may be corroded in some circumstances. You
need to clean and care the device by using the stainless steel
cleaner. It is suggested to clean the device every month.
●
Do not drop the device or subject it to physical shock, and do
not expose it to high
electromagnesm radiaon. Avoid the
equipment installaon on vibraons surface or places subject
to shock (ignorance can cause equipment damage).
●
Do not place the device in extremely hot (refer to the
specicaon of the device for the detailed operang
temperature), cold, dusty or damp locaons, and do not
expose it to high electromagnec radiaon.
●
The device cover for indoor use shall be kept from rain and
moisture.
●
Exposing the equipment to direct sun light, low
venlaon or
heat source such as heater or radiator is forbidden (ignorance
can cause
re danger).
●
Do not aim the device at the sun or extra bright places. A
blooming or smear may occur otherwise (which is not a
malfuncon however), and aecng the endurance of sensor
at the same me.
●
Please use the provided glove when open up the device cover,
avoid direct contact with the device cover, because the acidic
sweat of the
ngers may erode the surface coang of the
device cover.
●
Please use a so and dry cloth when clean inside and outside
surfaces of the device cover, do not use alkaline detergents.
vi
Loading ...
Loading ...
Loading ...