Hikvision DS-K3G501X User Manual

Loading ...

conguraon No. seng without saving changes. Conduct no

operaons for 5 s to cancel conguraon.

4.5.2 Inialize Device

Steps

1. Hold the inializaon buon on the access control board for 5

Figure 4-14 Inializaon Buon Posion

2. The device will start restoring to factory

sengs.

3. When the process is nished, the device will beep for 3 s.

Cauon

The inializaon of the device will restore all the parameters to

the default seng and all the device events are deleted.

Note

Make sure no persons are in the lane when powering on the

device.

4.5.3 Pair Keyfob via Buon

Pair the keyfob to the device via buon to open/close the barrier

remotely.

Before You Start

●

Oponal board is necessary for keyfob funcons.

●

Ask our technique supports or sales and purchase the keyfob.

Steps

Note

●

For details about buon's operaon, see Conguraon via

Buon.

●

For details about the conguraon No. and its related funcon,

see Buon Conguraon Descripon.

●

For details about the keyfob operaon instrucons, see the

keyfob's user manual.

1. Enter the keyfob pairing mode.

1) Enter the conguraon mode.

2) Set the conguraon No. in Level-1 to 2. The device will

enter the keyfob pairing mode.

3) Set the

conguraon No. in the Level-2 menu to 2. The

device will enter the keyfob pairing mode.

2. Hold the Close buon for more than 10 seconds.

The keyfob's indicator will ash if the pairing is completed.

3. Exit the keyfob pairing mode.

1) Enter the conguraon mode.

2) Set the conguraon No. in Level-1 to 2. The device will

enter the keyfob pairing mode.

Loading ...

Hikvision DS-K3G501X Pro Tripod Turnstile

User Manual - Page 25