Loading ...
Loading ...
Loading ...
6.6.2 Set Time
Set the device's me zone and synchronizaon mode.
Click Conguraon → System → System Sengs → Time
Sengs .
Click Save to save the sengs aer the conguraon.
Time Zone
Select the device located me zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and
interval.
Manual
By default, the device
me should be synchronized
manually. You can set the device me manually or check
Sync. with Computer Time to synchronize the device
me
with the computer's me.
6.6.3 Set DST
Steps
1. Click Conguraon → System → System Sengs → Time
Sengs .
2. Enable DST.
3. Set the DST start me, end me and bias me.
4. Click Save to save the sengs.
6.6.4 Change Administrator's Password
Steps
1. Click Conguraon → User Management .
2.
Click .
3. Enter the old password and create a new password.
4. Conrm the new password.
5. Click OK.
Cauon
The password strength of the device can be automacally
checked. We highly recommend you change the password of
your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case leers,
lower case leers, numbers, and special characters) in order to
increase the security of your product. And we recommend you
change your password regularly, especially in the high security
system, changing the password monthly or weekly can
beer
protect your product.
Proper conguraon of all passwords and other security
sengs is the responsibility of the service provider and/or end-
user.
6.6.5 Online Users
The informaon of users logging into the device is shown.
Go to
Conguraon → User Management → Online Users to
view the list of online users.
19
Loading ...
Loading ...
Loading ...