Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/19768772-ds-k3g501x/bg40.png)
Steps
1. Click Access Control → Advanced Funcon → Device
Parameter to enter access control parameter conguraon
page.
2.
In the device list on the le, click to expand the door, select
an alarm input and you can edit the alarm input's parameters
on the right.
3. Set the alarm output parameters.
Name
Edit the card reader name as desired.
Alarm Output
Acve Time
How long the alarm output will last aer triggered.
4. Click OK.
5.
Oponal: Set the switch on the upper right corner to ON to
trigger the alarm output.
Congure Parameters for Lane Controller
Aer adding the lane controller to the client, you can congure its
parameters for passing through the lane.
Before You Start
Add access control device to the client.
Steps
1. Click Access Control → Advanced
Funcon → Device
Parameter to enter Parameter Sengs page.
2. In the device list on the le, select a lane controller and you
can edit the lane controller's parameters on the right.
3. Edit the parameters.
Passing Mode
Select the controller which will control the barrier status of
the device.
Permission Controller Passing Mode
Select the passing mode as Normal Mode or Schedule
Template Mode.
Alarm Voice Prompt Time
Duraon
Set how long the audio will last, which is played when an
alarm is triggered .
Note
0 refers to the alarm audio will be played unl the alarm is
ended.
Lightboard Brightness
Adjust the brightness of the device light.
Memory Mode
Mulple cards presenng for mulple persons passing is
allowable when enabling the memory mode. When the
passing person's number exceeds the card
presenng
number, or aer the latest person passing with no other
person passing within the door open
duraon, the door will
closed automacally.
4. Click OK.
51
Loading ...
Loading ...
Loading ...