Loading ...
Loading ...
Loading ...
Note
The door or oor's status duraon sengs will be copied to the
selected door/oor(s) as well.
Congure Parameters for Card Reader
Aer adding the access control device, you can congure its card
reader parameters.
Before You Start
Add access control device to the client.
Steps
1. Click Access Control → Advanced
Funcon → Device
Parameter .
2.
In the device list on the le, click to expand the door, select a
card reader and you can edit the card reader's parameters on
the right.
3. Edit the card reader basic parameters in the Basic
Informaon
page.
Note
●
The displayed parameters may vary for dierent access
control devices. There are part of parameters listed as
follows. Refer to the user manual of the device for more
details.
●
Some of the following parameters are not listed in the Basic
Informaon page, click More to edit the parameters.
Name
Edit the card reader name as desired.
Card Authencaon Interval
The me interval between two connuous card recognions
when authencang.
Repeated Authencaon Interval
Within the specied interval, repeated authencaon of the
same card number (uploaded by dierent devices) is invalid,
and only one authencaon is performed.
Enable Failed
Aempts Limit of Authencaon/Max. Failed
Aempts for Authencaon
Enable to report alarm when the card reading aempts
reach the set value.
Card Reader Type/Card Reader Descripon
Get card reader type and descripon. They are read-only.
4. Click OK.
5. Oponal: Click Copy to, and then select the card reader(s) to
copy the parameters in the page to the selected card reader(s).
Congure Parameters for Alarm Output
Aer adding the access control device, if the device links to alarm
outputs, you can congure the parameters.
Before You Start
Add access control device to the client, and make sure the device
supports alarm output.
50
Loading ...
Loading ...
Loading ...