Loading ...
Loading ...
Loading ...
Note
If you change the persons' access informaon or other related
informaon, you will view the prompt Access Group to Be
Applied on the right corner of the client.
You can click the prompt to apply the changed data to the
device. You can select either Apply Now or Apply Later.
Figure 7-4 Data Synchronizaon
7.7 Congure Advanced Funcons
You can congure the advanced funcons of access control to
meet some special requirements in
dierent scene.
Note
●
For the card related funcons(the type of access control card),
only the card(s) with access group applied will be listed when
adding cards.
●
The advanced funcons should be supported by the device.
●
Hover the cursor on the Advanced
Funcon, and then Click
to customize the advanced funcon(s) to be displayed.
7.7.1 Congure Device Parameters
Aer adding the access control device, you can congure the
parameters of access control device, access control points.
Congure Parameters for Access Control Device
Aer adding the access control device, you can congure its
parameters, including overlaying user informaon on picture,
uploading pictures aer capturing, saving captured pictures, etc.
Before You Start
Add access control device to the client.
Steps
1. Click Access Control → Advanced
Funcon → Device
Parameters .
Note
If you can not nd Device Parameter in the Advanced Funcon
list, hover the cursor on the Advanced Funcon, and then Click
to select the Device Parameter to be displayed.
2. Select an access device to show its parameters on the right
page.
3. Turn the switch to ON to enable the corresponding funcons.
48
Loading ...
Loading ...
Loading ...