Hikvision DS-K3G501X User Manual

Loading ...

Note

You should congure the template before access group

sengs. Refer to Congure Schedule and Template for details.

5. In the le list of the Select Person eld, select person(s) to

assign access authority.

6. In the le list of the Select Access Point eld, select door(s),

door

staon(s) or oor(s) for the selected persons to access.

7. Click Save.

You can view the selected person(s) and the selected access

point(s) on the right side of the interface.

Figure 7-3 Display the Selected Person(s) and Access Point(s)

8. Aer adding the access groups, you need to apply them to the

access control device to take

eect.

1) Select the access group(s) to apply to the access control

device.

2) Click Apply All to Devices start applying all the selected

access group(s) to the access control device or door

staon.

3) Click Apply All to Devices or Apply Changes to Devices.

Apply All to Devices

This

operaon will clear all the existed access groups of

the selected devices and then apply the new access group

to the device.

Apply Changes to Devices

This

operaon will not clear the existed access groups of

the selected devices and only apply the changed part of

the selected access group(s) to the device(s).

4) View the applying status in the Status column or click

Applying Status to view all the applied access group(s).

Note

You can check Display Failure Only to lter the applying

results.

The selected persons in the applied access groups will have the

authorizaon to enter/exit the selected doors/door staons

with their linked card(s).

Oponal: Click to edit the access group if necessary.

Loading ...

Hikvision DS-K3G501X Pro Tripod Turnstile