Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/19768772-ds-k3g501x/bg11.png)
1. Prepare for the installaon tools, check the components, and
prepare for the installaon base.
2. Seal the boom of the turnsle to avoid water from entering.
3. Move the pedestals to the corresponded posions.
Note
Make sure the installaon holes on the pedestals and the base
are aligned with each other.
4. Secure the pedestals with expansion bolts.
Note
●
Do not immerse the pedestal in the water. In special
circumstances, the immersed height should be no more than
150 mm.
4 General Wiring
Note
●
Aer maintenance, you should close the water-proof cover
over the high/low voltage module.
●
When you should maintain or disassemble the high voltage
modules, you should remove the enre high voltage modules
and maintain it outside the
turnsle. You should unplug the
cables that connected to the peripherals before maintenance
to avoid destroy of the device.
4.1 Components Introducon
By default, basic components of the turnsle are connected well.
The turnsle supports wiring the AC electric supply for the whole
system's power supply.
The picture displayed below describes each component's
posion
on the turnsle.
Note
The diagram is for reference only.
Figure 4-1 Components Diagram
The picture displayed below describes the serial port on the
entrance and exit
direcon.
4
Loading ...
Loading ...
Loading ...