Hikvision DS-K3G501X User Manual

Loading ...

3) Set the conguraon No. in the Level-2 menu to 1. The

device will exit the keyfob pairing mode.

5 Acvaon

You should acvate the device before the rst login. Aer

powering on the device, the system will switch to Device

Acvaon page.

Acvaon via the device, SADP tool and the client soware are

supported.

The default values of the device are as follows:

●

The default IP address: 192.0.0.64

●

The default port No.: 80

●

The default user name: admin

5.1 Acvate via SADP

SADP is a tool to detect, acvate and modify the IP address of the

device over the LAN.

Before You Start

●

Get the SADP soware from the supplied disk or the ocial

website hp://www.hikvision.com/en/ , and install the SADP

according to the prompts.

●

The device and the PC that runs the SADP tool should be within

the same subnet.

The following steps show how to

acvate a device and modify its

IP address. For batch acvaon and IP addresses modicaon,

refer to User Manual of SADP for details.

Steps

1. Run the SADP

soware and search the online devices.

2. Find and select your device in online device list.

3. Input new password (admin password) and conrm the

password.

Cauon

STRONG PASSWORD RECOMMENDED-We highly recommend

you create a strong password of your own choosing (using a

minimum of 8 characters, including upper case leers, lower

case leers, numbers, and special characters) in order to

increase the security of your product. And we recommend you

reset your password regularly, especially in the high security

system,

reseng the password monthly or weekly can beer

protect your product.

Note

Characters containing admin and nimda are not supported to

be set as acvaon password.

4. Click Acvate to start acvaon.

Loading ...

Hikvision DS-K3G501X Pro Tripod Turnstile

User Manual - Page 26