Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/18667177-ds-2xc6646g0-p-izhrs/bg61.png)
2.
Click Min. Size, and drag the mouse in the live view to draw the minimum target size.
3.
Click Save.
10.3 Road Trac
Vehicle Detecon and Mixed-trac Detecon are available for the road trac monitoring. The
device captures the passing motor vehicles and non-motor vehicles and uploads the relevant
informaon together with the captured pictures.
Note
●
For certain device models, you need to select Road Trac on VCA Resource page rst.
●
This funcon is only supported by certain device models.
10.3.1 Set Vehicle Detecon
The vehicles that enter the set lane can be detected and the picture of the vehicle and its license
plate can be captured and stored. Alarms will be triggered and captures can be uploaded.
Before You Start
Go to VCA → VCA Resource , and select Road Trac.
Steps
1.
Go to VCA → Road Trac → Detecon Conguraon , and select Vehicle Detecon as detecon
type.
2.
Check Enable.
3.
Select the total number of lanes.
4.
Click and drag the lane line to set its posion, or click and drag the line end to adjust the length
and angle of the line.
5.
Adjust the zoom rao of the camera so that the size of the vehicle in the image is close to that of
the red frame. Only the posion of red frame is adjustable.
Note
Only 1 license plate can be captured at one me for each lane.
6.
Select Region and Country/Region.
7.
Select the license plate informaon upload mode.
Entrance/Exit The license plate informaon of the detected vehicle will be uploaded when
the vehicle passes the detecon area and triggers the detecon in entrance/
exit.
City Street The license plate informaon of the detected vehicle will be uploaded when
the vehicle passes the detecon area and triggers the detecon in city
streets.
Network Camera User Manual
85
Loading ...
Loading ...
Loading ...