Hikvision DS-2XC6646G0/P-IZHRS User Manual

Loading ...

10.2.3 Set Region Entrance Detecon

It is used to detect objects entering a pre-dened virtual region from the outside place. If it occurs,

the device can take linkage acons.

Before You Start

Go to VCA → VCA Resource , and select Smart Event.

Steps

Go to VCA → Smart Event → Region Entrance Detecon .

Check Enable.

Select one Region. For the region sengs, refer to Draw Area .

Set the detecon target, sensivity and the target validity.

Sensivity It stands for the percentage of the body part of an acceptable target that goes

across the pre-dened region. Sensivity = 100 - S1/ST × 100. S1 stands for

the target body part that goes across the pre-dened region. ST stands for the

complete target body. The higher the value of sensivity is, the more easily

the alarm can be triggered.

Detecon

Target

Human and vehicle are available. If the detecon target is not selected, all the

detected targets will be reported, including the human and vehicle.

Target

Validity

If you set a higher validity, the required target features should be more

obvious, and the alarm accuracy would be higher. The target with less obvious

features would be missing.

Figure 10-3 Set Rule

Network Camera User Manual

Loading ...

Hikvision DS-2XC6646G0/P-IZHRS 4MP ANPR Varifocal Anti-Corrosion Bullet Camera