Hikvision DS-2XC6646G0/P-IZHRS User Manual

Loading ...

7.11 Set Alarm Server

The device can send alarms to desnaon IP address or host name through HTTP, HTTPS, or ISUP

protocol. The desnaon IP address or host name should support HTTP, HTTP, or ISUP data

transmission.

Steps

Go to Conguraon → Network → Advanced Sengs → Alarm Server .

Enter Desnaon IP or Host Name, URL, and Port.

Oponal: Check Enable to enable ANR.

Select Protocol.

Note

HTTP, HTTPS, and ISUP are selectable. It is recommended to use HTTPS, as it encrypts the data

transmission during communicaon.

Click Test to check if the IP or host is available.

Click Save.

7.12 Access Camera via Hik-Connect

Hik-Connect is an applicaon for mobile devices. Using the App, you can view live image, receive

alarm nocaon and so on.

Before You Start

Connect the camera to network with network cables.

Steps

Get and install Hik-Connect applicaon by the following ways.

Visit

hps://appstore.hikvision.com to download the applicaon according to your mobile

phone system.

Visit the ocial site of our company. Then go to Support → Tools → Hikvision App Store .

Scan the QR code below to download the applicaon.

Note

If errors like "Unknown app" occur during the installaon, solve the problem in two ways.

Network Camera User Manual

Loading ...

Hikvision DS-2XC6646G0/P-IZHRS 4MP ANPR Varifocal Anti-Corrosion Bullet Camera