Hikvision DS-2XC6646G0/P-IZHRS User Manual

Loading ...

Sensivity Sensivity stands for the percentage of the body part of an acceptable target

that enters the pre-dened region. Sensivity = 100 - S1/ST × 100. S1 stands

for the target body part that goes across the pre-dened region. ST stands for

the complete target body. The higher the value of sensivity is, the more

easily the alarm can be triggered.

Threshold Threshold stands for the threshold for the me of the object loitering in the

region. If the me that one object stays exceeds the threshold, the alarm is

triggered. The larger the value of the threshold is, the longer the alarm

triggering me is.

Detecon

Target

Human and vehicle are available. If the detecon target is not selected, all the

detected targets will be reported, including the human and vehicle.

Target

Validity

If you set a higher validity, the required target features should be more

obvious, and the alarm accuracy would be higher. The target with less obvious

features would be missing.

Figure 10-1 Set Rule

Oponal: You can set the parameters of mulple areas by repeang the above steps.

For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,

refer to Linkage Method Sengs .

Click Save.

10.2.2 Set Line Crossing Detecon

It is used to detect objects crossing a pre-dened virtual line. If it occurs, the device can take

linkage acons.

Before You Start

Go to VCA → VCA Resource , and select Smart Event.

Steps

Go to VCA → Smart Event → Line Crossing Detecon .

Network Camera User Manual

Loading ...

Hikvision DS-2XC6646G0/P-IZHRS 4MP ANPR Varifocal Anti-Corrosion Bullet Camera