Loading ...
Loading ...
Loading ...
Note
For more informaon about FTP sengs, refer to Set FTP .
10.3.4 Import or Export Blocklist & Allowlist
You can import and export the blocklist and allowlist as desired, and check the list content in this
interface.
Steps
1.
Click Browse to open the PC local directory.
2.
Find the blocklist & allowlist le and click to select it. Click Open to conrm.
Note
●
The le to import should corresponds with the le template that is required by the camera.
You are recommended to export an empty blocklist & allowlist le from the camera as the
template and ll in the content.
●
The le should be in the .xls format and the cell format should be Text.
3.
Click Import to import the selected le.
4.
Click Export to open the PC local directory.
5.
Select a directory in your PC local directory.
6.
Name the le in the le name text led.
7.
Click Save.
10.4 Hard Hat Detecon
This funcon detects targets in the set detecon region who do not wear a hard hat and triggers
an alarm.
Note
●
For certain device models, you need to select AI Open Plaorm on VCA Resource page rst.
●
The funcon is only supported by certain device models.
10.4.1 Set Hard Hat Detecon
Before You Start
Go to VCA → VCA Resource , and select AI Open Plaorm.
Steps
1.
Go to VCA → Hard Hat Detecon → AI Open Plaorm .
2.
Drag Hard Hat Detecon model in Model Library to Engine to bind them.
3.
Click Hard Hat Detecon model in Engine and click Task to enable the funcon.
Network Camera User Manual
88
Loading ...
Loading ...
Loading ...