Hikvision DS-2XC6646G0/P-IZHRS User Manual

Loading ...

Oponal: You can set the parameters of mulple areas by repeang the above steps.

For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,

refer to Linkage Method Sengs .

Click Save.

10.2.4 Set Region Exing Detecon

It is used to detect objects exing from a pre-dened virtual region. If it occurs, the device can take

linkage acons.

Before You Start

Go to VCA → VCA Resource , and select Smart Event.

Steps

Go to VCA → Smart Event → Region Exing Detecon

Check Enable.

Select one Region. For the detecon region sengs, refer to Draw Area .

Set the detecon target, sensivity and the target validity.

Sensivity It stands for the percentage of the body part of an acceptable target that goes

across the pre-dened region. Sensivity = 100 - S1/ST × 100. S1 stands for

the target body part that goes across the pre-dened region. ST stands for the

complete target body. The higher the value of sensivity is, the more easily

the alarm can be triggered.

Detecon

Target

Human and vehicle are available. If the detecon target is not selected, all the

detected targets will be reported, including the human and vehicle.

Target

Validity

If you set a higher validity, the required target features should be more

obvious, and the alarm accuracy would be higher. The target with less obvious

features would be missing.

Network Camera User Manual

Loading ...

Hikvision DS-2XC6646G0/P-IZHRS 4MP ANPR Varifocal Anti-Corrosion Bullet Camera