Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/63279498-ds-k1a802mf-b/bg5c.png)
6.6.4 Congure Device Acons for Person ID
You can set the access control device's linkage acons for the specied person ID. When access
control device detects the specied person ID, it can trigger the alarm output, buzzer on card
reader, and other acons, so as to implement special monitoring on the specied person.
Steps
Note
It should be supported by the device.
1. Click Access Control → Linkage Conguraon .
2. Select the access control device from the list on the le.
3. Click Add to add a new linkage.
4. Select Person Linkage as the event source.
5. Enter the employee number or select the person from the drop-down list.
6. Select the card reader where the card swipes.
7. In the Linkage Target area, set the property target to enable this acon.
Buzzer on Controller
The audible warning of access control device will be triggered.
Buzzer on Reader
The audible warning of card reader will be triggered.
Capture
An event-related picture will be captured when the selected event happens.
Recording
An event-related picture will be captured when the selected event happens.
Note
The device should support recording.
Alarm Output
The alarm output will be triggered for nocaon.
Alarm Input
Arm or disarm the alarm input.
Note
The device should support zone funcon.
Access Point
The door status of open, close, remain open, or remain closed will be triggered.
Audio Play
Fingerprint Time Aendance Terminal User Manual
77
Loading ...
Loading ...
Loading ...