Hikvision DS-K1A802MF-B User Manual

Loading ...

6. Select the uploading mode from the drop-down list.

Enable N1 or G1 for the main channel and the backup channel.

Select Close to disable the main channel or the backup channel

Note

The main channel and the backup channel cannot enable N1 or G1 at the same me.

7. Click Save.

Create EHome Account in Wired Communicaon Mode

You can set the account for EHome protocol in wired communicaon mode. Then you can add

devices via EHome protocol.

Steps

Note

• This funcon should be supported by the device.

• Make sure the device is not added by EHome.

1. Enter the Access Control module.

2. On the navigaon bar on the le, enter Advanced Funcon → More Parameters .

3. Select an access control device in the device list and enter Network → Network Center .

4. Select the center group from the drop-down list.

5. Select the Address Type as IP Address or Domain Name.

6. Enter IP address or domain name according to the address type.

7. Enter the port number for the protocol.

Note

The port number of the wireless network and wired network should be consistent with the port

number of EHome.

8. Select the Protocol Type as EHome.

9. Set an account name for the network center.

10. Click Save.

Set Aendance Status

You can set the aendance mode on the device via the client. You can also set the aendance

parameters as check in, check out, break out, break in, overme in, and overme out on the device

according to your actual needs.

Fingerprint Time Aendance Terminal User Manual

Loading ...

Hikvision DS-K1A802MF-B K1A802 Pro Series Fingerprint Time Attendance Terminal