Hikvision DS-K1A802MF-B User Manual

Loading ...

6. Set shortcut key from the drop-down list for the aendance status.

7. Click Save.

Result

Press a key on the device keypad to select an aendance status and authencate. The

authencaon will be marked as the congured aendance status according to the dened

shortcut key.

Or when you authencate on the device inial page, you will enter the Select Status page. Select a

status to take aendance.

Note

If you do not select a status for about 20 s, the authencaon will be failed and it will not be

marked as a valid aendance.

Set Auto Aendance

Set the aendance mode as auto, and you can set the aendance status and its available me

duraon. The system will auto change the aendance status according to the congured

parameters.

Before You Start

Add at least one person, and set the person's authencaon mode. For details, see Person

Management .

Steps

1. Click Access Control → Advanced Funcon → More Parameters to enter the More Parameters

page.

2. Select a device from the le panel.

3. Click Aendance Status.

4. Set the aendance mode as Auto.

5. Make sure Aendance Status Required is enabled.

Note

By default, Aendance Status Required is enabled.

6. Set available me for the target aendance status.

1) Move the cursor on the target me and the enable checkbox will display.

2) Check the checkbox and set the available me.

3) Click anywhere on the page to conrm the sengs. The congured me will be displayed in

white.

7. Set shortcut key from the drop-down list for the aendance status.

8. Click Save.

The aendance status will be valid within the congured me duraon.

Fingerprint Time Aendance Terminal User Manual

Loading ...

Hikvision DS-K1A802MF-B K1A802 Pro Series Fingerprint Time Attendance Terminal