Hikvision DS-K1A802MF-B K1A802 Pro Series Fingerprint Time Attendance Terminal

User Manual - Page 78

For DS-K1A802MF-B.

PDF File Manual, 133 pages, Read Online | Download pdf file

DS-K1A802MF-B photo
Loading ...
Loading ...
Loading ...
Note
The displayed parameters may vary for dierent access control devices.
Some of the following parameters are not listed in the Basic Informaon page, click More to
edit the parameters.
Dismiss Code
Create a dismiss code which can be used to stop the buzzer of the card reader (by entering
the dismiss code on the keypad).
Note
The dismiss code should be dierent from the authencaon password.
The length of the dismiss code is according the device, usually it should contains 4 to 8 digits.
5. Click OK.
6. Oponal: Click Copy to , and then select the door(s) to copy the parameters in the page to the
selected door(s).
Note
The door's status duraon sengs will be copied to the selected door(s) as well.
Congure Parameters for Card Reader
Aer adding the access control device, you can congure its card reader parameters.
Steps
1. Click Access Control → Advanced Funcon → Device Parameter .
2. In the device list on the le, click to expand the door, select a card reader and you can edit
the card reader's parameters on the right.
3. Edit the card reader basic parameters in the Basic Informaon page.
Note
The displayed parameters may vary for dierent access control devices. There are part of
parameters listed as follows. Refer to the user manual of the device for more details.
Some of the following parameters are not listed in the Basic Informaon page, click More to
edit the parameters.
Name
Edit the card reader name as desired.
Minimum Card Swiping Interval
If the interval between card swiping of the same card is less than the set value, the card
swiping is invalid. You can set it as 0 to 255.
Fingerprint Time Aendance Terminal User Manual
63
Loading ...
Loading ...
Loading ...