Loading ...
Loading ...
Loading ...
By default, the ID No. will be increased in sequence. You can edit the ID according to your
preference.
Note
• The ID refers to the user aendance serial No.
• The ID should be between 1 and 99999999 and should not start with 0.
• The ID should be used for once.
Name
Enter the new user name.
Note
• Press the up or down key on the keypad to change the input method.
• Up to 32 characters are allowed in the user name.
Card
Set: Swipe card on the card swiping area or enter card No. manually, and select a card
property.
View Info.: View the user's added card informaon.
Note
• The card No. is required.
• Up to 20 digits can be contained in the card No.
• The card No. can be 0.
• The card No. can start with 0 when it contains more than one numbers. E.g. 012345.
• The card No. should be used for once.
• If device does not support swiping card, you should enter the card No. manually. If you
need to enter the card No. manually, you should enable Press Key to Input Card No.. For
details, see Congure Parameters for Access Control Device .
FP (Fingerprint)
On the Fingerprint page, select a target nger and record according to the voice prompt.
Note
• The same ngerprint cannot be repeatedly added.
• Up to 10 ngerprints can be added to one user.
• You can also scan the ngerprints via the external ngerprint recorder and apply the
ngerprints to the device by the client soware.
• For detailed informaon about scanning the ngerprint, see Tips for Scanning Fingerprint .
PWD (Password)
Create a password for the user and conrm the password.
Fingerprint Time Aendance Terminal User Manual
13
Loading ...
Loading ...
Loading ...