Hikvision DS-K1A802MF-B User Manual

Loading ...

Proper conguraon of all passwords and other security sengs is the responsibility of the

installer and/or end-user.

6. Oponal: Check Synchronize Time to synchronize the device me with the PC running the client

aer adding the device to the client.

7. Oponal: Check Import to Group to create a group by the device name.

Note

You can import all the channels of the device to the corresponding group by default.

8. Finish adding the device.

Click Add to add the device and back to the device list page.

Click Add and New to save the sengs and connue to add other device.

9. Oponal: Click

on Operaon column to view device status.

6.1.4 Add Device by EHome Account

For areas where devices using dynamic IP addresses instead of stac ones, you can add access

control device connected via EHome protocol by specifying the EHome account.

Before You Start

Set the network center parameter rst. For details, refer to Set Network Parameters .

Steps

Note

For the devices added by EHome don't support uploading events with captured pictures to the

client.

1. Enter Device Management module.

2. Oponal: Click on the right of Device Management and select Device.

The added devices are displayed in the list.

3. Click Add to open the Add window.

4. Select EHome as the adding mode.

5. Enter the required informaon.

Device Account

Enter the account name registered on EHome protocol.

EHome Key

Enter the EHome key if you have set it when conguring network center parameter for the

device.

Note

This funcon should be supported by the device.

Fingerprint Time Aendance Terminal User Manual

Loading ...

Hikvision DS-K1A802MF-B K1A802 Pro Series Fingerprint Time Attendance Terminal