Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/63279498-ds-k1a802mf-b/bg58.png)
Result
Enter the device inial page, the current aendance mode will be displayed on the page. If you do
not select a status, the authencaon will be marked as the congured aendance status
according to the congured me. If you press the key on the keypad, and select a status to take
aendance, the authencaon will be marked as the selected aendance status.
Example
If set the Up key as check in and the Down key as check out, and set the check in's me as Monday
08:00, and check out's me as Monday 17:00, the valid person's authencaon before 17:00 on
Monday will be marked as check in. And the valid person's authencaon aer 17:00 on Monday
will be marked as check out.
6.6 Congure Linkage Acons for Access Control
You can congure dierent linkage acons for the event detected by the access control device.
Aer that, linkage acons will be triggered once the event happens. This mechanism is used for
nofying the security personnel the event, or triggering automac access control in real me.
Two types of linkage acons are supported:
• Client Acons: When the event is detected, it will trigger the acons on the client, such as the
client making an audible warning..
• Device Acons: When the event is detected, it will trigger the acons of a specic device, such
as buzzing of a card reader and, opening/closing of a door, ..
6.6.1 Congure Client Acons for Access Event
You can assign client linkage acons to the event by seng up a rule. For example, when the event
is detected, an audible warning appears to nofy the security personnel.
Steps
Note
The linkage acons here refer to the linkage of the client soware's own acons such as audible
warning, email linkage, etc.
1. Click Event Management → Access Control Event .
The added access control devices will display in the device list.
2. Select a resource from the device list.
The event types which the selected resource supports will display.
3. Select the event(s) and click Edit Priority to dene the priority for the event(s), which can be
used to lter events in the Event Center.
4. Set the linkage acons of the event.
1) Select the event(s) and click Edit Linkage to set the client acons when the events triggered.
Fingerprint Time Aendance Terminal User Manual
73
Loading ...
Loading ...
Loading ...