Loading ...
Loading ...
Loading ...
5. Select an access control device which supports ngerprint recognion funcon from the drop-
down list.
6. Collect the ngerprint.
1) Click Start.
2) Place and li your ngerprint on the ngerprint scanner of the selected access control device
to collect the ngerprint.
3) Click Add to save the recorded ngerprint.
7. Conrm to add the person.
-
Click Add to add the person and close the Add Person window.
-
Click Add and New to add the person and connue to add other persons .
6.2.6 Congure Access Control Informaon
When adding a person, you can set her/his access control properes, such as seng the person as
visitor or as blocklist person, or as super user who has super authorizaon.
Steps
1. Enter Person module.
2. Select an organizaon in the organizaon list to add the person and click Add.
Note
Enter the person's basic informaon rst. For details about conguring person's basic
informaon, refer to Congure Basic Informaon .
3. In the Access Control panel, set the person's access control properes.
PIN Code
The PIN code must be used aer card or ngerprint when accessing. It cannot be used
independently. It should contain 4 to 8 digits.
Super User
If the person is set as a super user, he/she will have authorizaon to access all the doors/
oors and will be exempted from remaining closed restricons, all an-passback rules, and
rst person authorizaon.
Extended Door Open Time
When the person accessing door, grant this person more me to pass through doors which
have been congured with extended open duraon. Use this funcon for the persons with
reduced mobility.
For details about seng the door's open duraon, refer to Congure Parameters for Door .
Add to blocklist
Add the person to the blocklist and when the person tries to access doors/oors, an event
will be triggered and send to the client to nofy the security personnel.
Mark as Visitor
Fingerprint Time Aendance Terminal User Manual
52
Loading ...
Loading ...
Loading ...