Loading ...
Loading ...
Loading ...
Note
This funcon should be supported by the device.
Disable Aendance Mode
Disable the aendance mode and the system will not display the aendance status on the device
inial page.
Before You Start
Add at least one person, and set the person's authencaon mode. For details, see Person
Management .
Steps
1. Click Access Control → Advanced Funcon → More Parameters to enter the More Parameters
page.
2. Select a device from the le panel.
3. Click Aendance Status.
4. Set the aendance mode as Disable.
5. Click Save.
Result
The aendance status funcon is disabled, and you will not view or congure the aendance
status on the device inial page.
Set Manual Aendance
Set the aendance mode as manual, and you can select a status manually when you take
aendance on the device.
Before You Start
Add at least one person, and set the person's authencaon mode. For details, see Person
Management .
Steps
1. Click Access Control → Advanced Funcon → More Parameters to enter the More Parameters
page.
2. Select a device from the le panel.
3. Click Aendance Status.
4. Set the aendance mode as Manual.
5. Make sure Aendance Status Required is enabled.
Note
By default, Aendance Status Required is enabled.
Fingerprint Time Aendance Terminal User Manual
70
Loading ...
Loading ...
Loading ...