Hikvision DS-K1A802MF-B User Manual

Loading ...

Alarm of Max. Failed Aempts

Enable to report alarm when the card reading aempts reach the set value.

Max. Times of Card Failure

Set the max. failure aempts of reading card.

Card Reader Type/Card Reader Descripon

Get card reader type and descripon. They are read-only.

Default Authencaon Mode

View the default card reader authencaon mode.

Fingerprint Capacity

View the maximum number of available ngerprints.

Exisng Fingerprint Number

View the number of existed ngerprints in the device.

4. Click Advanced and you can congure more parameters.

Enable Card Reader

Enable the funcon and you can operate the funcons below on the card reader.

Buzzer Polarity

Set Buzzer Polarity of main board according to the card reader parameters. Generally, adopts

the default sengs.

Max. Interval When Entering PWD

When you inpung the password on the card reader, if the interval between pressing two

digits is larger than the set value, the digits you pressed before will be cleared automacally.

Fingerprint Recognion Level

Select the ngerprint recognion level from the drop-down list.

Fingerprint Recognion Interval

Select the ngerprint recognion interval from the drop-down list.

5. Click OK.

6. Oponal: Click Copy to, and then select the card reader(s) to copy the parameters in the page

to the selected card reader(s).

6.5.2 Congure Remaining Open/Closed

You can set the status of the door as open or closed. For example, you can set the door remaining

closed in the holiday, and set the door remaining open in the specied period of the work day.

Before You Start

Add the access control devices to the system.

Fingerprint Time Aendance Terminal User Manual

Loading ...

Hikvision DS-K1A802MF-B K1A802 Pro Series Fingerprint Time Attendance Terminal