Loading ...
Loading ...
Loading ...
The system will automacally assign IP address for the device.
5. Press ESC and select Yes to save the parameters and return to the previous menu.
5.4.2 Set Wi-Fi Parameters
You can enable the Wi-Fi funcon and you can transmit the data via Wi-Fi.
Steps
Note
The funcon is supported by parts of the device models.
1. Move the cursor and select Comm. → Wi-Fi .
2. Press OK to enter the Wi-Fi page.
Figure 5-2 Wi-Fi Page
3. Enable the Wi-Fi funcon.
4. Select a Wi-Fi from the list and set the Wi-Fi parameters, including the Wi-Fi password, IP mode,
IP address, subnet mask, and gateway.
5. Press ESC and select Yes to save the parameters.
5.4.3 Set EHome Parameters
Set EHome parameters and the device can upload data via EHome protocol.
Before You Start
Make sure your device has connect to a network.
Steps
1. Move the cursor and select Comm. → EHome .
Fingerprint Time Aendance Terminal User Manual
15
Loading ...
Loading ...
Loading ...