Loading ...
Loading ...
Loading ...
Settingchannelskip
To prevent certain channels from being viewed,
channel positions can be skipped.
1 From the SETUP menu, highlight TV Settings
and press @.
2 Press • or • to select Channel Options and
press _. The list of channels will appear.
3 Press • or • to select a channelposition to be
skipped and press @. A tick will appear in the
box.
To remove the tick, press _ again.
Note: Skipped channels cannot be selected with _ or %[._,
however they can still be accessed using the Channel
Number on the remote control.
Settingvideo inputskip
If you set a video input source to be skipped, it will
be skipped over when selecting the input by
repeatedly pressing _).
To turn on the skip:
1 Tune to the video input source to be skipped.
2 From the SETUP menu, highlight Manual
Setting and press @. The setting window will
appear.
3 Press • or • to select _ (skip) and press [gi#l.
To
1
2
3
turn off the skip:
Select the video input that is set to skip by @ or
channel number entry.
From the SETUP menu, highlight Manual
Setting and press @. The setting window will
appear.
Press • or • to select _-, (skip off) and press fi_.
Labelingvideo inputsources
You can label video input sources.
1
2
3
Tune to the input you want to label.
From the SETUP menu, highlight Manual
Setting and press @. The setting window will
appear.
Press I_ to move from the skip selection in order
to select a label, and press• or • to put in the
desired characters and press @.
4 Repeat steps 1 through 3 for other inputs.
5 To save your settings, press @.
Note:
• Available characters are 0-9, A-Z, (,), *, _, -, and /
• To label an HDM! input, you need to set Enable REGZA-
LINK to Off (_r' page 60).
38
Loading ...
Loading ...
Loading ...