Loading ...
Loading ...
Loading ...
Usingthe remotecontrolto
operateyour otherdevices
Your TV remote control has one dedicated TV mode
and three programmable multi-brand modes:
CABLE/SAT, DVD, and VCR/PVR. The default
device modes and programmable device modes are
listed below.
Note: The TV remote control is oreprogrammed to operate
most Toshiba devices. To operate a non-Toshiba device or
a Toshiba device that the remote control is not
preprogrammed to operate, you wil! need to program the
remote control. See "'Programming the remote control to
operate your other devices" (at right).
Default device mode control (before
MODE SELECT programming)
TV Toshiba TV
CABLE !SAT Toshiba Satellite receiver
DVD Orion DVD
VCR/PVR Toshiba VCR
MODE SELECT Device mode control after programming
TV Toshiba TV
CABLE/SAT
DVD
VCR/PVR
Multi-brand video/audio devices
Note: Although your new TV's remote control includes
codes for many devices, it may not include codes for some
or all of the features on certain devices you wish to control.
If you are unable to program the TV's remote control to
operate your device or some of the features on that device.
use the device's remote control or the controls on the
device.
Programmingthe remote control
to operateyour otherdevices
Device code setup
{ Find the code for your device brand in the remote
control device code table on pages 26-33. If more
than one code is listed, try each one separately
until you find one that works.
2 Press the applicable mode select button (CABLE/
SAT, DVD, or VCR/PVR), until the mode select
button blinks 3 times.
3 While holding down _, press the five-digit
device code for your device.
• If a valid code is entered, the mode select
button will blink twice.
• If an invalid code is entered, the mode select
button will blink one long blink.
4 Point the remote control at the device and press
POWER
® to test the code.
• If the device responds to the remote control,
you have entered the correct code.
• If the device does not respond to the remote
control, repeat steps 3 and 4 using another
code.
Note: After programming the remote control, make
sure all necessary keys on the TV remote control (in
addition to p_E.) operate your device. If some keys are
not operational, repeat the device code setup using
another code (if other codes are listed for your device).
If, after trying all listed codes, the necessary keys do
not operate your device, use the device's original
remote control.
5 To control the TV, press IV.
Note:
• Every time you change the batteries you will need to
reprogram the remote control.
• Some newer VCRs respond to either of two codes. These
VCRs have a switch labeled "VCR 1/VCR2." If your VCR
has this kind of switch and does not respond to the codes
for your VCR brand, set the switch to the other position
("VCR1" or "VCR2") and reprogram the remote contro!.
24
Loading ...
Loading ...
Loading ...