Loading ...
Loading ...
Loading ...
en Installation instructions
36
Recommended settings
Defrosting
Meal Accessory/cookware Shelf position Type of
heating
Temperature
in°C
Cooking
time,
minutes
Baked items, cake and
bread, fruit, veget-
ables, meat products
Wire rack 2
3+1
- -
21.11 Test dishes
This table has been produced for test institutes to facil-
itate the inspection of the appliance.
Baking
Please take note of the following information if you are
baking test dishes.
General information
¡ The setting values apply to food placed in the cook-
ing compartment while the cooking compartment is
still cold.
¡ Observe the notes about preheating in the tables.
These setting values assume that the rapid heating
function is not being used.
Shelf positions
Shelf positions for baking on one level:
Baking tins on the wire rack: Shelf position 3
Note:When grilling, insert the baking tray as well. Any
dripping liquid is then collected by the baking tray and
the cooking compartment is kept clean.
Recommended settings
Cakes in tins
Meal Accessory/cookware Shelf posi-
tion
Type of
heating
Temperature
in°C
Cooking
time,
minutes
Sponge cake
1
3 160
2
35-40
1
Place the glass cookware side-by-side in the centre of the wire rack. Use heat-resistant glass cookware only. Never
set hot glass cookware down on a cold or wet surface after taking it out of the oven. This may cause the glass cook-
ware to crack.
2
Preheat the appliance for 15 minutes. Never use the rapid heating function for preheating.
Toast
Dish Accessory/cookware Shelf posi-
tion
Power
level
Type of heat-
ing
Cooking
time, mins
Toasting bread, 15 slices
1
Wire rack 5
2
1.5-2.5
1
Place the bread for toasting in the centre of the wire rack.
2
Preheat the appliance for 4 minutes. Never use the rapid heating function for preheating.
22 Installation instructions
The installation instructions contain instructions for
the gas connection and for the gas conversion's as-
sembly .
Note:For after-sales service only.
22.1 General information
Your appliance must only be converted from
one gas type to another by authorised per-
sonnel who have received appropriate train-
ing. The procedure must always be carried
out in accordance with the instructions in
this manual.
Incorrect connection and incorrect settings
may damage the appliance. The appliance
manufacturer shall accept no liability for in-
correct connections or incorrect settings.
Loading ...
Loading ...
Loading ...