Loading ...
Loading ...
Loading ...
Troubleshooting en
29
Fault Cause and troubleshooting
Burner goes out
straight after being ig-
nited.
Openings on the burner are soiled.
▶
Clean and dry the openings on the burner.
The burner flame is
not uniform.
The burner parts are positioned incorrectly.
1.
Position the burner parts precisely and evenly.
2.
Ensure that the locking catches click into place in the recesses.
Openings on the burner are soiled.
▶
Clean and dry the openings on the burner.
The burner flame
goes out while the
appliance is in opera-
tion.
Gas cylinder is empty.
▶
Replace the gas cylinder.
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.
The safety valve for the gas line is closed.
▶
Open the safety valve for the gas line.
The burner does not
ignite.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.
The ignition plugs are wet.
▶
Light the gas burner with a gas lighter or a match.
The flame for the
oven does not burn
through all outlet
openings.
Openings on the burner are soiled.
▶
The burner must be professionally cleaned.
All dishes prepared in
the oven burn within
a short period of
time.
The thermostat is faulty.
▶
Call customer service.
The fan position is
not working.
The grill selector is switched on.
▶
Ensure that the grill selector is switched off.
The fan position is not selected.
▶
Ensure that the fan position is switched on.
The oven switches
off.
The gas pressure is too high or too low.
▶
Light the gas burner with a gas lighter or a match.
Incorrect installation.
▶
Call customer service.
Power failure.
▶
Check the oven's power supply.
The cooling fan is not
working.
The cooling fan is faulty.
▶
Call customer service.
The oven lighting is
switched off.
The oven light bulb is faulty.
▶
Call customer service.
The rotary spit is not
working.
The rotary spit is not inserted.
▶
Ensure that the rotary spit is inserted correctly.
The rotary spit motor is not working.
▶
Call customer service.
The glass cover
closes quickly
Hinge screws on the lid are loose
▶
Tighten the hinge screws on the right and left sides of the lid.
Loading ...
Loading ...
Loading ...