GE - General Electric JGB810DEP1CC GE gas range

User Manual - Page 41

For JGB810DEP1CC.

PDF File Manual, 60 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Installation Instructions
WARNING!
INSTALLATION SAFETY
INSTRUCTIONS
Read these instructions compIetelg and carefu!lg.
Improper installation, adjustment, alteration, service
or maintenance can cause injury or property
damage. Refer to this manual. For assistance or
additional information, consult a qualified installer,
service agencg, manufacturer (dealer) or the gas
supplien
Never reuse old flexible connectors The use
of old flexible connectors can cause gas leeks and
personal injure Always use NEW flexible connectors
when installing a gas appliance,
IMPORTANT - Remove all packingmaterial
and literature from oven before connecting gas and
electrical suppfg to range
CAUTION - Donotattempt to operate
the oven of this range during a power failure (Electric
Ignition models onlg}
IE!Have gour range installed bg a qualified installer.
i@Your range must be electricalIg grounded in
accordance with Ioca! codes or, in the absence
of local codes, in accordance with the National
Electrical Code (ANSt/NFPA70, latest edition)
In Canada. electrical grounding must be in
accordance with the current CSAC22 1 Canadian
Electrical Code Part I and/or local codes See
Electrical Connections in this section
[] Before installing gour range on linoleum or ang other
sgnthetic floor covering, make sure the floor covering
can withstand 180°Fwithout shrinking, warping or
discoloring Do not install the range over carpeting
unless e sheet of 1/4" thick plgwood or similar
insulator is placed between the range and carpeting
I1 Hake sure the wall coverings around the range can
withstand heat generated bg the range up to 200°F
m
W
Avoid placing cabinets above the range To reduce
the hazard caused bg reaching over the open flames
of operating burners, install o ventilation hood over
the range that projects forward at least S" begond
the front of the cabinets
The ventilating hood must be constructed
of sheet metal not less than 0 0!22" thick
Insta!l above the cooktop with a clearance of not less
than t/4" between the hood and the underside of the
combustible material or metal cabinet The hood
must be at least as wide as the appliance and
centered over the appliance Clearance between the
cooking surface and the ventilation hood surface
MUST NEVER BE LESS THAN 24 INCHES
EXCEPTION:Installation of a listed microwave oven or
cooking appliance over the cooktop shall conform to
the installation instructions pocked with that appliance
[]
If cabinets ore placed above the range.
allow a minimum clearance of 30" between the
cooking surface and the bottom of unprotected
cabinets
[]
If a 30" clearance between cooking surface and
overhead combustible material or metal cabinets
cannot be maintained, protect the underside of the
cabinets above the cooktop with not Iess than 1/4"
insulating millboard covered with sheet metal not less
than 0 0122" thick Clearance between the cooking
surface and protected cabinets MUST NEVER BE LESS
THAN 24 INCHEE
[] The vertical distance from the plane of the cooking
surface to the bottom of adjacent overhead cabinets
extending closer than t" to the plane of the range
sides must not be less than 18" ISee the Dimensions
and Clearances illustration in this section }
[] A CAUTION - Itemsofinterestto
children should not be stored in cabinets above
a range or on the backsplash of a range-children
climbing on the range to reach items could be
seriouslg injured
41
Loading ...
Loading ...
Loading ...