Loading ...
Loading ...
Loading ...
Installation
Instructions
e
l lfgou have questions, call 1.800.GE.CARES or visit our Website at: GEAppliances.com ....................I
in the Commonwealth
of Massachusetts
• This product must be installed by o licensed plumber
or gas fitter
• When using ball tgpe gas shut-off valves theg shatl
be the T-handle tgpe
• A flexible gas connector, when used, must nat exceed
3 feet
BEFORE YOU BEGIN
Read these instructions completelg and carefully
installation of this range must conform with local
codes or, in the absence of local codes, with the
National Fuel Gas Code, ANSI Z223ol/NFPA 54, latest
edition In Canada, installation must conform with the
current Natural Gas Installation Code, CAN/CGA-
B149.1 or the current Propane Installation Code,
CAN/CGA-B149,2, and with local codes where
applicable_ This range has been design-certified by
CSA International according to ANSI Z21_1, latest
edition, and Canadian Gas Association according
to CAN/CGA-1 1 latest edition.
As with any appliance using gas and generating heat,
there are certain safety precautions you should follow
You will find these precautions in the Important Safety
Information section in the flont of this manual Read
them carefully
• IMPORTANT - Savetheseinstructions
for local electrical inspectors use.
• iN PORTANT - Observeallgoverning
codes and ordinances
o Note to Installer - Leave these instructions
with the appliance after installation is completed
° Note to Consumer - Keepthis Owner's !anual
and lnstallotion instructions far future reference
° Note - This appliance must be properlg grounded
• Servicer - The electrical diagram is in an envelope
attached ta the back of the range
° Skill level - Installation of this appliance requires
basic mechanical skills,
° Proper installation is the responsibilitg af the installer
° Product failure due to improper installation is not
covered under the Warrantg.
FOR YOUR SAFETY
Do not store or use combustible materials, gasoline
or other flammable vapors and liquids in the vicinitg
of this or ang other appliance.
If you smell gas:
0 Open windows
Don't touch electrical switches
Extinguish ang open flame
Immediotetg call gaur gas supplier
[111111111111111111 iiiiii iiii iiiii iii
TOOLS YOU WILL NEED
Philtipsscrewdriver
Flat-bladescrewdriver
Pencilandruler
0pen-end or
adjustable wrench
Level
Pipewrenches{2}
(onefor backup)
Drill, awl or nail
.i HI..,. q l
.i... ul uiull, uli
MATERIALS YOU MAY NEED
• Gaslineshut-off valve
• Pipe-joint sealant or UL-approved pipe thread tape with
Teflon* that resists action of natural and LP gases
• Flexible metal appliance connector 11/2" I D,)
A 5-feat length is recommended for ease of installation
but other lengths are acceptable Never use an old
connector when installing a new range
• Flare union adapter for connection to gas supplg line
(314" or 112" NPT x 1t2" I D)
• Flare union adapter far connection to pressure regulator
on range 11/2" NPT × 1/2" I D]
• Liquid leak detector or soapg water:
• Lag bolt or :1/2" 0 D sleeve anchor (for concrete floors
onlg)
•Teflon:Registeredtrademarkof DuPont
4O
Loading ...
Loading ...
Loading ...