Loading ...
Loading ...
Loading ...
Using Scan Tool Memory
VIEWING DATA IN MEMORY
87
When you retrieve DTCs from a vehicle, the data is saved to the Scan
Tool’s memory.
Each time you retrieve DTCs, existing data in the Scan Tool's
memory is overwritten with the new data.
VIEWING DATA IN MEMORY
When you turn the Scan Tool on while NOT connected to a vehicle, and
data is currently saved in the Scan Tool’s memory, the Scan Tool enters
Memory mode. You can view DTCs and Live Data stored in the Scan
Tool’s memory.
1. With the Scan Tool NOT connected to a vehicle, press and release
the POWER/LINK
button to turn the Scan Tool on.
If the Scan Tool’s batteries are low, a warning message displays.
Replace the batteries before continuing.
2. If more than one vehicle is stored in the
Scan Tool’s memory, the Vehicle
Selection menu displays. Select the
desired vehicle, then press ENTER
.
If there are no vehicles
currently stored in the Scan
Tool, an advisory message
displays. Press M to return to
the Main Menu.
The Memory System Menu displays.
3. Select the DTCs you wish to view, then
press ENTER
.
The Scan Tool displays the "priority"
DTC.
If there are no DTCs currently stored in the Scan Tool’s
memory, an advisory message shows.
Press DTC/FF
to scroll through all
stored DTCs, and to view Freeze
Frame data for the priority DTC.
When all DTCs have been displayed
and DTC/FF
is pressed, the Scan
Tool displays the first enhanced DTC
stored in memory. Press DTC/FF
to
scroll through all stored enhanced
DTCs.
4. When you have finished viewing data in the Scan Tool's memory,
press and release POWER/LINK
to turn the Scan Tool off.
Loading ...
Loading ...
Loading ...