Loading ...
Loading ...
Loading ...
Additional Tests
SYSTEM CHECKS MENU
68
4. When test results have been retrieved,
data for the selected sensor test will
show on the Scan Tool's display.
5. When you have finished viewing the
retrieved test data:
To view test results for the next
sensor, select Next, then press
ENTER
.
To return to the Select Sensor screen, select Back, then press
ENTER
.
6. When you have finished viewing test data for all desired sensors,
select Back, then press ENTER
to return to the System Test
menu; or, press M to return to the Main Menu.
OBD Monitor Check
The OBD Monitor Check function retrieves and displays test results for
emission-related powertrain components and systems that are not
continuously monitored. The tests available are determined by the
vehicle manufacturer.
The Scan Tool does not perform the OBD monitor check, but
retrieves results from the most recently performed tests from
the on-board computer’s memory. You may retrieve OBD
monitor check results for only one test at any given time.
1. From the System Test menu, select OBD Monitor Check, then
press ENTER
.
2. A “One moment please. . .” message
displays, followed by the Select Test
screen. (Refer to the vehicle’s service
repair manual for information related to
non-continuous tests.)
If OBD monitor check data is not
presently stored in the vehicle’s
computer, an advisory message
displays. Press M to return to the Main Menu.
If OBD monitor checks are not supported by the vehicle under
test, an advisory message displays. Press M to return to the
Main Menu.
3. Select the desired test, then press
ENTER
to display the test results.
The display shows the following
information:
Test ID number
Module ID number
Component ID number
Loading ...
Loading ...
Loading ...