Loading ...
Loading ...
Loading ...
Ford OBD1 Systems
ERASING DTCs
45
2. Turn the ignition ON. DO NOT start the engine.
3. Press and release ERASE
. A confirmation message shows.
If you are sure you want to proceed,
select YES, then press ENTER
button to. An “instructional” message
displays.
- Turn the ignition OFF and wait
for the on-screen prompt.
- When prompted, turn the ignition
ON and press ENTER
to
continue.
If you do not want to proceed, select NO, then press ENTER
to exit the erase function.
4. If you chose to erase DTCs, a “One
moment please…” message displays
while the erase function is in progress.
If the erase was successful, a confir-
mation message shows. The Scan
Tool automatically re-links to the
vehicle’s computer after three seconds.
If the erase was not successful, an “advisory” message shows.
- Verify the ignition is ON.
- Check the cable connections at the Scan Tool and at the
vehicle’s DLC.
- Turn the ignition OFF, wait 10 seconds, then turn back ON to
reset the computer.
- Press SYSTEM MENU
to return to the Ford Menu, then
repeat steps 3 and 4.
Erasing DTCs does not fix the problem(s) that caused the
code(s) to be set. If proper repairs to correct the problem that
caused the code(s) to be set are not made, the code(s) will
appear again and the check engine light will illuminate as soon
as the problem that cause the DTC to set manifests itself.
Loading ...
Loading ...
Loading ...