Loading ...
Loading ...
Loading ...
Additional Tests
VIEWING DRIVE CYCLE PROCEDURES
78
1. While linked to a vehicle, press M.
The Main Menu displays.
2. Select Drive Cycle Procedures, then
press ENTER
.
A “One moment please…” message
displays while the Scan Tool
retrieves Monitor status from the
vehicle’s computer.
3. When Monitor status has been retrieved, the Drive Cycle
Procedures menu displays. Depending on Monitor status, you can
view Drive Cycle procedures for Monitors Incomplete or Monitors
Complete.
If Drive Cycle Procedures are not available for the vehicle, an
advisory message shows on the Scan Tool’s display. Select
Back, then press ENTER
to return to the Main Menu.
4. Select Monitors Incomplete or Monitors
Complete, as desired, then press ENTER
.
A list of the available Monitors for
the selected status displays.
If no Monitors for the selected
status are detected, an advisory message shows. Select Back,
then press ENTER
to return to the Main Menu.
5. Select the Monitor for which you wish to view Trip Cycle Procedures,
then press ENTER
.
A “One moment please…” message displays while the Scan
Tool retrieves the requested Trip Cycle Procedure. The Trip
Cycle Procedures screen for the Monitor displays when the
procedure has been retrieved.
If a Trip Cycle Procedure for the selected Monitor is not
available, an advisory message shows. Select Back, then
press ENTER
to return to the Main Menu.
6. The Drive Cycle Procedure screen
shows the specific set of operating
procedures that ensure the vehicle is
driven in such a way that all the
required “Enabling Criteria” for the
Monitor to run and complete its
diagnostic testing are met.
7. When you are finished viewing the Drive Cycle Procedures, press
ENTER
to return to the Drive Cycle Procedures menu, or, press
M to return to the Main Menu.
Loading ...
Loading ...
Loading ...