Loading ...
Loading ...
Loading ...
Live Data Mode
RECORDING (CAPTURING) LIVE DATA
63
If the Scan Tool fails to establish communication with the vehicle,
a “Communication Error” message displays.
- Ensure your vehicle is OBD2 compliant.
- Verify the connection at the DLC, and verify the ignition is ON.
- Turn the ignition OFF, wait 5 seconds, then back ON to reset
the computer.
- Press POWER/LINK
to continue.
3. Select Record Manually, then press ENTER
.
The Select PIDs to Record screen displays.
4. Press UP
and DOWN to scroll
through the available PIDs. When a PID
you wish to record is highlighted, press
ENTER
(a “checkmark” shows to
confirm your selection). Repeat until
only the PIDs you want to record have
all been selected.
To deselect a PID, highlight the PID, then press ENTER . The
checkmark is removed.
To record all PIDs, select Record All PIDs, the press
LD to continue.
5. When you are finished making your selections, press LD to continue.
The Record Live Data screen
displays.
Highlight Start Recording. Put the
engine in the operating condition
where the problem manifests itself.
- If necessary, drive the vehicle
until you reach the vehicle speed
at which the problem occurs.
6. When the problem occurs, press and release LD.
A progress message shows on the display.
- You can stop and save recorded Live Data at any time by
pressing ENTER
.
When recording is complete, a confirmation screen displays.
Select Yes and press ENTER
to playback Live Data (see
LIVE DATA PLAYBACK on page 64 for details) or select No and
press ENTER
to return to the Live Data menu, as desired.
If recording was not successful, an advisory message displays.
Press ENTER
to return to the Record Live Data menu.
Loading ...
Loading ...
Loading ...