Loading ...
Loading ...
Loading ...
Scan Tool Controls
BATTERY REPLACEMENT
6
2. Slide the battery cover off (use your fingers).
3. Replace batteries with three AA-size batteries (for longer life, use
Alkaline-type batteries).
4. Reinstall the battery cover on the back of the Scan Tool.
Adjustments After Battery Installation
The first time the Scan Tool is turned on, you must select the desired
display language (English, French or Spanish) and unit of measurement
(Standard or metric) as follows:
1. Press the POWER/LINK
button to turn the Scan Tool “ON.”
The Select Language screen displays.
2. Select the desired display language, then press ENTER
.
The Select Unit screen displays.
3. Select the desired unit of measurement, then press ENTER
The Scan Tool’s Firmware Version screen displays.
After the initial language and unit of measurement selections
are performed, these, as well as other settings, can be
changed as desired. Proceed to “ADJUSTMENTS AND
SETTINGS” on page 84 for further instructions.
Loading ...
Loading ...
Loading ...