Loading ...
Loading ...
Loading ...
Additional Tests
PERFORMING SERVICE RESETS
69
Min or Max test limit (Only one test limit, either Min or Max, is
shown for any given test.)
Test Value and status
Status is calculated by the Scan Tool by comparing the Test
Value against the displayed test limit (either Min or Max).
Status is shown as either Low, High or OK.
4. When you have finished viewing the retrieved test data, select Back
on the Select Test screen, then press ENTER
to return to the
System Test menu; or, press M to return to the Main Menu.
EVAP Check
The EVAP Check function lets you initiate a leak test for the vehicle's
EVAP system.
The Scan Tool does not perform the leak test, but signals to
vehicle's on-board computer to initiate the test. The vehicle
manufacturer determines the criteria and method for stopping
the test once it has been started. BEFORE using the EVAP
Check function, refer to the vehicle's service repair manual to
determine the procedures necessary to stop the test.
1. From the System Test menu, select EVAP Check, then press
ENTER
.
2. A "One moment please..." message displays.
3. When the EVAP leak test has been
initiated by the vehicle's on-board
computer, a confirmation message
displays. Select Back, then press
ENTER
to return to the System Test
menu; or, press M to return to the Main
Menu.
Some vehicle manufacturers do not allow scan tools or other
external devices to control vehicle systems. If the EVAP Check is
not supported by the vehicle under test, an advisory message
displays. Press M to return to the Main Menu.
PERFORMING SERVICE RESETS
The Service Reset function offers up to five
options for performing service reset
procedures; Oil Reset, Battery Reset,
Steering Angle Sensor Calibration, EPB
Reset and ABS Bleeding.
Resetting the Oil Maintenance Light
1. While linked to the vehicle, press M.
Loading ...
Loading ...
Loading ...